2003 > 10 Point Bolt-in Roll cage made from FE45 Steel with 40 x 2mm and 50 x 2mm tubing, connecting sleeve tubes and X bracein the main hoop. Supplied with door bars and diagonal reinforcement at rear (AB/100).

Penetrates through dashboard, X brace in roof and reinforcement between main hoop and floor attachment

Weight 31Kg

FIA Approved

Picture for Illustration purposes only

Delivery between 2Days - 3 Weeks depending on Stock

2003 > Multi Point Weld-in Roll cage Chromoly (25CRM04) reduced weight and improved rigidity compared with Bolt-in Roll Cage .

Supplied Partially Assembled

Supplied with Door Bars, Front Turret Attachment, Rear turret or suspension Attachment, Penetrates Dashboard, Roof Attachment (Front), Wrap around harness attachment bar, Rear Hoop Reinforcement, Roofline reinforcement Tabs, X Brace on roof, X Brace on back stays, Reinforcement between main hoop and floor attachment

Homologated by RAC ASN

with 40 x 2mm and 50 x 2mm tubing, connecting sleeve tubes and X bracein the main hoop. Supplied with door bars and diagonalreinforcement at rear (AB/100).

Penetrates through dashboard, X brace in roof and reinforcement between main hoop and floor attachment

Weight 47Kg

FIA Approved

Picture for Illustration purposes only

Delivery between 2 Days - 3 Weeks depending on Stock

1996 > 10 Point Bolt-in Roll cage made from FE45 Steel with 40 x 2mm and 50 x 2mm tubing, connecting sleeve tubes and X bracein the main hoop. Supplied with door bars and diagonal reinforcement at rear (AB/100).

Penetrates through dashboard

Weight 30Kg

FIA Approved

Picture for Illustartion purposes only

Delivery between 2 Days - 3 Weeks depending on Stock

<1975 6 Point Bolt-in Roll cage made from FE45 Steel with door bars (To be cut to size and welded on Installation) AA104P

Sleeve connecting tubes between Front and Rear Hoop

Weight 30Kg

FIA Approved

Picture for Illustration purposes only

Delivery Between 2 Days - 3 Weeks Depending on Stock

1975 > 6 Point Bolt-in Roll cage made from FE45 Steel with door bars (To be cut to size and welded on Installation) AA104P

Sleeve connecting Tubes between Front and Rear Hoop

Weight 30Kg

NON FIA Approved

Picture is for Illustration purposes only

Delivery between 2 Days - 3 Weeks depending on Stock

2001 > 10 Point Bolt-in Roll cage made from FE45 Steel with 40 x 2mm and 50 x 2mm tubing, connecting sleeve tubes and X brace in the main hoop. Supplied with door bars and diagonal reinforcement at rear (AB/100).

Penetrates through dashboard, rear attachment points at B pillar, rear hoop reinforcements

Weight 28Kg

FIA Approved

Picture for Illustration purposes only

Delivery between 2 Days - 3 Weeks depending on Stock

1995> 10 Point Bolt-in Roll cage made from FE45 Steel with 40 x 2mm and 50 x 2mm tubing, connecting sleeve tubes and X bracein the main hoop. Supplied with door bars and diagonal reinforcement at rear (AB/100).

Penetrates through dashboard, rear attachment points at B pillar, rear hoop reinforcements

Weight 28Kg

FIA Approved

Picture for Illustration purposes only

Delivery between 2 Days - 3 Weeks depending on Stock